This project is approximately 17.2 kilometers and an approximately 1-kilometer long branch from the village of Hato Pilón to Mironó School, for a total length of 18.2 kilometers in this project. With a bid value of $12,617,907.16, Constructora Meco will be responsible for developing the studies and designs shown in the Terms of Reference required for the Project and construction of the road.
Overall, the project will be developed on the same existing alignment, except for specific cases where improvement to the horizontal and vertical geometry will be done as needed, based on geometric design standards.
The project starts at the junction that leads to the district of Mironó in (San Félix), and ends in the town of Hato Culantro, specifically up to the entrance of Otoe School, with an approximate length of 17.2 kilometers.
The project will also include an approximately 1-kilometer long additional branch from the village of Hato Pilón to Mironó School.
The first 4 km have some sections with double asphalt seal, V-shaped gutters and reinforced concrete pipes. An analysis of the concrete pipes will be done to verify the hydraulic section. This road has an average 5.5 m width, and it later has soil up to Hato Pitón and later another cut with slopes exceeding 20% to reach Hato Culantro (Otoe School).